Chanbob
I am trying to remove my main harness from the engine area so I can start rewiring it. Problem I have ran into as most probably have is the Spray in foam in the rear that insulates and keeps it all "glued" in.

What is the best thing you have found to remove this?

I don't want do any cutting into the body or inner body.

Quote 0 0
YELLRHD
Get yourself a good stiff piece of wire like a welding rod for an arc welder and shove it in next to the harness and work it all the way around.
It takes some patience but It'll get the job done.
Quote 0 0
Chanbob
Thank you very much. That is an idea I had. Just figured I should see what others have done too
Quote 0 0